|
|||||||||||||
|
|
|||||||||||||
Flap Box TutorialOne Piece of 12x12 Paper Bone Folder Adhesive Embellishments as desired  Cut paper into an 8x8 square. Save the leftover 4x12 piece.  Fold paper in half. Use bone folder to make a good clean crease.  After folding, open paper up and fold in half the other way. You should have four equal squares when this is done.
|
|||||||||||||
  |
 |
When you have done all four corners, your paper should look like this photo.
Now fold the closed paper up to the middle point. Use the middle and
the sides as your guide. The thicker your paper is, the harder this
step will be as you are folding up a few layers of paper at this
point. After folding, open your paper back up.
Do this on all four sides and open back up, your paper should look
like this.
Open up two opposite sides. Like photo above.
Lift up the other two opposite sides and turn the paper to face this
way.
Push the points of the paper sides in where creases already exist.
Doing this will make the open point want to go up.
This will create one of the sides and the paper will fold over and
then down into the box bottom.
The "point" will fold out to create another equal point on the
bottom.
Now do the other side.
Once again, pushing the side creases in will make the flap go up.
Fold over and down into the bottom of the box.
Use bone folder to make good clean creases.
If done correctly, you will need just a very small amount of
adhesives to keep the bottom points down. The box folds in such a
way that adhesives on the sides are not necessary.
This is your completed box. Set it aside.
Cut your 4"x12" piece of paper to 4"x 8.5"
Score your 4"x8.5" paper at 3.5". Then turn it and score again at
3.5"
Adhere bottom of box to bottom of flap.
Adhere side of box to side of paper flap.
Your box construction is complete. Now just decorate and add goodies
as desired!
Here is the same box with a lid.
Here is the same box, stacked and covered to make a tower.
Subscribe To Our Newsletter
Get updates on new projects, ideas
and tutorials!!!
Do this on all four sides and open back up, your paper should look like this.
Open up two opposite sides. Like photo above.
Lift up the other two opposite sides and turn the paper to face this
way.
Push the points of the paper sides in where creases already exist.
Doing this will make the open point want to go up.
This will create one of the sides and the paper will fold over and
then down into the box bottom.
The "point" will fold out to create another equal point on the
bottom.
Now do the other side.
Once again, pushing the side creases in will make the flap go up.
Fold over and down into the bottom of the box.
Use bone folder to make good clean creases.
If done correctly, you will need just a very small amount of
adhesives to keep the bottom points down. The box folds in such a
way that adhesives on the sides are not necessary.
This is your completed box. Set it aside.
Cut your 4"x12" piece of paper to 4"x 8.5"
Score your 4"x8.5" paper at 3.5". Then turn it and score again at
3.5"
Adhere bottom of box to bottom of flap.
Adhere side of box to side of paper flap.
Your box construction is complete. Now just decorate and add goodies
as desired!
Here is the same box with a lid.
Here is the same box, stacked and covered to make a tower.
Subscribe To Our Newsletter
Get updates on new projects, ideas
and tutorials!!!
Open up two opposite sides. Like photo above.
Lift up the other two opposite sides and turn the paper to face this
way.
Push the points of the paper sides in where creases already exist.
Doing this will make the open point want to go up.
This will create one of the sides and the paper will fold over and
then down into the box bottom.
The "point" will fold out to create another equal point on the
bottom.
Now do the other side.
Once again, pushing the side creases in will make the flap go up.
Fold over and down into the bottom of the box.
Use bone folder to make good clean creases.
If done correctly, you will need just a very small amount of
adhesives to keep the bottom points down. The box folds in such a
way that adhesives on the sides are not necessary.
This is your completed box. Set it aside.
Cut your 4"x12" piece of paper to 4"x 8.5"
Score your 4"x8.5" paper at 3.5". Then turn it and score again at
3.5"
Adhere bottom of box to bottom of flap.
Adhere side of box to side of paper flap.
Your box construction is complete. Now just decorate and add goodies
as desired!
Here is the same box with a lid.
Here is the same box, stacked and covered to make a tower.
Subscribe To Our Newsletter
Get updates on new projects, ideas
and tutorials!!!
Cut your 4"x12" piece of paper to 4"x 8.5"
Score your 4"x8.5" paper at 3.5". Then turn it and score again at
3.5"
Adhere bottom of box to bottom of flap.
Adhere side of box to side of paper flap.
Your box construction is complete. Now just decorate and add goodies
as desired!
Here is the same box with a lid.
Here is the same box, stacked and covered to make a tower.
Subscribe To Our Newsletter
Get updates on new projects, ideas
and tutorials!!!
Here is the same box, stacked and covered to make a tower.
|
|
|
|
||
|
|
|
|
||
Subscribe To Our Newsletter
Get updates on new projects, ideas and tutorials!!!
E-den
(noun) 1. The garden God created where Adam and Eve first
lived.
2. A delight. a. Any place seen as being perfect, highly
pleasing, or happy.
[Contact
Us] [Newsletter] [Ideas]
[Links]
[Home] [Classes]
[Kits] [My
Cricut
Blog]
Copyright: Scrapbook Eden, Inc. 2009©
All rights reserved. No part of this website can be
reproduced without the express written consent of the owner. Please
see our privacy notice for further guideline. Please feel free to
contact the webmaster if necessary.